Showing posts with label paint shop. Show all posts
Showing posts with label paint shop. Show all posts

Sunday, June 29, 2008

Today's Project


The paint shop after further upgrade.

A bathroom exhaust fan draws air into the booth and out the back. A few layers of t-shirt cotton stretched over an old picture frame will be fixed against the hole to filter paint from the air.

I still have to cut out a pane of plexiglass to tack over the upper half of the paint box opening.

Switching maneuvers


Today's project: Upgrade the paint shop.

The Paasche air compressor was a lucky find at an estate sale. I think I got it for less than ten bucks.

I've played around with it and an air brush I bought on e-bay but what I really wanted was a switched plug for it and an exhaust fan. Today's project was to wire the switch and plug.

The shelf they're mounted on is just off the floor under the spray booth that's built into the work bench above it. The hose for the air brush will easily reach the front of the booth.

Saturday, September 15, 2007

A Painting Primer

To give the first coat of cream a bit more strength, I thought I'd try a primer coat of white, applied around the windows of this coach. The results below: one coat on the right, two in the middle, three on the left. I honestly couldn't tell you if the game was worth the candle.

Here's one weird thing about painting this particular coach: I ran across a patch of plastic where the acrylic paint turned instantly to sludge as I applied it, making a smooth, even coat impossible. I scraped it off and tried again with the same result. I've never seen a reaction like this, but then I've never used acrylic paints on plastic models before.

Wednesday, September 5, 2007

Putting My College Education to Work


Yours truly holds a bachelor's degree in the liberal arts, and of the electives I took to earn that sheepskin, several involved dirtying card paper with acrylic paint.

Now, decades later, I was faced with the problem: How do I paint the roof of this RPO when the commercially-produced Tamiya paint I bought for the job sucks? (It really does. Don't waste your money.)

As it happened, my tool box held several tubes of acrylic paint I bought from an art shop to paint some signs, probably for a garage sale, and there was still more than enough Mars black to see if I could still remember how to mix paint with water.

You know what? This stuff is leagues better than bottled paint, and a teensy dab goes a long, long way. Fussing with getting the right mix of paint to water is hardly any trouble at all, and even rewarding when it comes out just exactly right.

Of course, it's pretty easy for me to brag when I'm using black straight out of the tube. I'd probably be a frustrated wreck sucking on a bottle of grain alcohol in a dark corner if I'd tried to mix maroon on my quaint little tea saucer.

It's my first baby step.

Thursday, August 23, 2007

Stirred, Not Shaken



I used to shake all my paints to mix them up, but They say you're not supposed to do that because of the air bubbles. That doesn't bother me as much as the clotted crud that builds up on the lid and inside the neck of the bottle.

They say you're supposed to stir your paints. I tried that, but never did find a tool that would thoroughly mix the paint up with the solvent.

As I sat down to paint one night I thought, You know, I stirred it up just last night so it shouldn't have separated all that much, and I gave it a little swirl like this. Mixed it up just fine, so I thought I'd share this little tip with you.

Wednesday, August 22, 2007

Just Like Starting Over

Daunted. That's the way I always feel when I start painting a car body. I know that after a few nights of persistent painting it'll shape up nicely, but that first coat looks so mousy, no matter what color it is or the method I use to apply it. I'm grateful the camera can't clearly see how both the cream and the maroon look thin and runny, as though I wasn't even trying.

I sprayed the cream on (see previous post), but I probably won't use the airbrush again on this model, mostly because I don't have the time tonight to clean it up, and especially not to mask off the parts where I don't want any more cream color. Besides, I want to hold a real brush. There'll be plenty of opportunities later to try masking for a complete airbrush job.

The work is slow, particularly where I have to use the point of the brush to mark off the boundary between the maroon and the cream. There's a line of rivets there as big as soft balls, but if I methodically pace myself the results are gratifying as well as relaxing, believe it or not.

Dig the grampa glasses. Fifteen dollars at Walgreen's. It's the only way I can focus on the details so as not to slop paint where it's not wanted. I've got one of those hooded things that goes over my head with the thick lenses, but I never could adjust the band so they'd stay on when I turned my head, and they're so uncomfortable I've used them only a handful of times. Reading glasses are the bomb.

Tuesday, August 21, 2007

Let Us Spray


As much as I hate cleaning the furshluginner thing, there's nothing that matches an air brush for sheer speed. I put a first coat on these two cars in less than the time it took to write two quick sentences about it.

But the second coat went on with a brush, because it's better that way. The first coat can go on any old way, but I need more control after that, and a brush is the only way to paint that makes me feel as though I'm in control. The air brush blasts paint all over the place, as you can see, unless I mask off the rest of the car body. Athearn molded these cars with rivets that stick out about six scale inches, though, which makes masking a bit of a problem, and I'm still trying to work it out.

If it seems as though I'm spending a lot of time painting, it's because I'm trying to decide on a scale. This makes a little bit of sense, so please bear with me.

I conceived of the Lost Continent Railway as an N-scale layout. I even laid a respectable amount of track for it, but when I began to paint the rolling stock I realized that there was no way I was made to work in that scale. Maybe I could have at one time, but now I'm wearing the strongest reading glasses available at the drug store for the up-close work, and they're not helping all that much in N.

In HO I feel I can actually see what I'm doing. I can get my hands around the car body and hold it still. The brush isn't as big as a vestibule door. Painting the larger cars takes longer, but satisfaction is up.

I'd love to try working in O, but we don't have enough room in our basement to give up for a layout in 1:48 (not that I have a layout now). I dabbled briefly with the idea of building in S, but my research showed me that the available rolling stock, track and building kits are priced far outside my budget. HO is at my upper limit of affordability, habitability and visibility.

But what to do with all that N-scale equipment?

Monday, August 20, 2007

Transformations


The "decorated" dining car as delivered by Athearn, and a diner in the livery, sort of, of the Lost Continent Railway. The "decoration" on the upper car consists entirely of the words "New York Central," "Dining Car" and other gold lettering. There's not a spot of paint anywhere on it, not even the roof. Conversely, there isn't a single letter anywhere on the painted car. I haven't worked out how I'm going to do that, yet.

The decorated car has had three or four coats of cream, I forget exactly, and one coat of maroon over an old coat of lighter, glossy maroon. Oddly, both the old and new coat are both supposed to be "Milwaukee Road Maroon" but aren't even close, unless you squint, and turn off the lights. The cream color is what makes the livery good-looking, if you ask me, but I love to say "maroon" so much more than "cream."

Sunday, August 19, 2007

A Day Behind The Paint Brush


Like all barbarians, I still paint my rolling stock with a brush. It's an especially ironic choice given that brushing on several coats takes hours, while the reason I don't like to use an airbrush (I have three different kinds) is all the time spent cleaning them out, not to mention that fiddling with masking tape frustrates the hell out of me.

The first coat is usually so discouragingly thin it makes me want to chuck all my paints and find a very simple hobby I might be good at, such as picking my nose or counting my fingers. It's particularly disheartening when I'm applying a light color on a dark background, just about all the time at my work bench because of all the cream in the livery of the LoCoRwy.

After applying just one more coat, applied just an hour or so after the first, the results are encouraging enough that I feel good about moving on.